2014 Latest Apple 9L0-314 Dump Free Download(71-80)!

QUESTION 71
A MacBook sometimes becomes unresponsive and the cursor freezes on the display when running an application. You have verified the symptom, and have already attempted to force the application to quit, but the computer remains unresponsive. What should you try next?

A.    Disconnect all power sources for several minutes to reset the SMC.
B.    Hold the eject button down for several seconds to reset the application.
C.    Hold the trackpad button down for several seconds to regain cursor control.
D.    Press the power button for several seconds to try shutting the computer down.

Answer: D

QUESTION 72
What precautions should be taken if a discharged CRT must remain exposed for any length of time?

A.    You should reset the Power Manager Unit on the logic board.
B.    You should perform a full set of video adjustments on the CRT.
C.    You should remove the CRT from the computer or display assembly.
D.    You should establish an ongoing lead between the CRT anode and ground.

Answer: D

QUESTION 73
The LED on a MacBook MagSafe power adapter doesn’t illuminate at all when it’s plugged into the MacBook and you know the adapter is connected to a known good power source. What is most likely the cause of this symptom?

A.    The MacBook has a faulty main battery.
B.    The MagSafe adapter needs to be reset first.
C.    The MacBook requires an SMC firmware update.
D.    A MagSafe adapter connector pin is stuck down.

Answer: D

QUESTION 74
To ensure proper fan and temperature control in the Power Mac G5, you must run the thermal calibration routine found on the ______ disc whenever you replace a processor or logic board with a new processor or logic board.

A.    Apple Service Diagnostic
B.    Apple Hardware Test
C.    Fan Control Installer
D.    Mac OS X Installer

Answer: A

QUESTION 75
You are troubleshooting an eMac that has no image on its built-in display. You have already checked user controls and reset PRAM, but the issue persists. When you connect an external display to the eMac’s VGA output port and restart the eMac, you see a proper image on the external display. Which of the following service modules would most likely be the cause of these symptoms?

A.    Display Analog Assembly
B.    Power Supply Assembly
C.    Logic Board
D.    Hard drive

Answer: A

QUESTION 76
A customers iBook G4 forgets the time and date when the main battery is completely drained and there is no AC adapter connected for several hours. Is this behavior normal?

A.    Yes
B.    No

Answer: A

QUESTION 77
Which of the following PowerBook G4 models does NOT support hot-swapping the main battery?

A.    PowerBook G4 (12-inch)
B.    PowerBook G4 (15-inch)
C.    PowerBook G4 (17-inch)

Answer: A

QUESTION 78
On a MacBook Pro, Safe Sleep ensures that _____.

A.    any open IP ports from services are closed before putting the machine to sleep
B.    the machine is locked with a configured password after a specified amount of time
C.    data stored in main memory will not be lost should the system shut down due to power loss while
the machine is asleep
D.    the user is prompted to save documents in any open applications before machine is put to sleep
using the Sleep command from the Apple menu

Answer: C

QUESTION 79
Examine the exhibit. What type of port does the number 1 identify?

A.    USB
B.    FireWire
C.    Sound In
D.    MagSafe
E.    Sound Out
F.    ExpressCard

Answer: D

QUESTION 80
Which section of any Apple service manual is the BEST place to look for instructions for replacing an internal component?

A.    Views
B.    Basics
C.    Take Apart
D.    Troubleshooting

Answer: C

If you want to pass the Apple 9L0-314 Exam sucessfully, recommend to read latest Apple 9L0-314 Dump full version.