2014 Latest Apple 9L0-314 Dump Free Download(21-30)!

QUESTION 21
Where is the best place for a customer to look for information about locating her Mac’s serial number?

A.    Downloads
B.    Discussions
C.    Service News
D.    User’s manual

Answer: D

QUESTION 22
A customer brings a Mac Pro to your service center for repair. After finding the serial number, which TWO of the following sources will display the proper AppleCare name for that Mac Pro? SELECT TWO

A.    MRI
B.    GSX
C.    Console
D.    System Profiler
E.    About This Mac
F.    Apple Name Tool
G.    Apple Hardware Test

Answer: AB

QUESTION 23
Which of the following measurements is an example of an appropriate use of a multimeter when troubleshooting a Mac?

A.    Measure logic board battery voltage.
B.    Measure high voltage going to a CRT.
C.    Measure AC current going to an optical drive.
D.    Measure digital signals on the main processor.

Answer: A

QUESTION 24
What component of a Mac mini (Early 2009) logic board requires use of an anti-static foam support to avoid damage?

A.    EMI clips
B.    Video card
C.    Large heat sink
D.    Battery connector

Answer: A

QUESTION 25
Examine the exhibit. What is this message?

clip_image001

A.    Kernel Panic
B.    Software Update
C.    Firmware Update
D.    Power-On Self-Test

Answer: A

QUESTION 26
What is the indication that a Mac has completed a successful power-on self test (POST)?

A.    Startup Chime.
B.    A series of beeps.
C.    The Login Window starts.
D.    The Desktop, Dock, and menu bar load.

Answer: A

QUESTION 27
What step is required before upgrading the RAM in a Mac Pro (Early 2009)?

A.    Remove the processor tray.
B.    Remove the hard drive carriers.
C.    Remove the front inlet fan assembly.
D.    Remove the Optical Drive and Carrier.

Answer: A

QUESTION 28
The Mac Pro (Early 2009) has SMC functionality split between a primary SMC on the backplane board, and a secondary SMC on the processor board. What service issue should a technician be aware of when servicing the Mac Pro (Early 2009)?

A.    SMC firmware must always match on both boards.
B.    Three internal buttons must be pressed in order to reset both SMCs.
C.    It is required to remove the memory riser card in order to reset the SMC.
D.    Processor trays are interchangeable between similar Mac Pro (Early 2009) units.

Answer: A

QUESTION 29
A customer brings his MacBook Pro (17-inch Mid-2010) in for servicing. It is not functioning correctly and you suspect the machine has been damaged by the customer. As you inspect for accidental damage, you should open the lid and confirm that the hinges are working smoothly and inspect the LCD for scratches on the display coatings or cracks in the glass. You should also ____________________ and __________________. SELECT TWO

A.    open the hard disk drive to check for scratches or dust inside
B.    look for cracks, dents or scratches on the exterior of the system
C.    connect the system to external speakers to check for sound output
D.    check for any unusual odors coming from the system, which might indicate spill damage
E.    ask the customer to describe in detail how he abused his computer to the point that it no longer functions

Answer: BD

QUESTION 30
After identifying some accidental damage and pointing it out to the customer, the customer says “Apple’s warranty should cover this kind of problem.” How should you respond?

A.    Apple will only cover the internal damage, not the cosmetic damage, so the charge will be less.
B.    You’re right, Apple’s warranty does cover this kind of accidental damage, so the repair will be free.
C.    Apple’s warranty does not cover this, but the AppleCare Protection Plan might, but only if you buy it now.
D.    Apple’s warranty specifically calls out accidental damage as an instance where system failures are
not covered.

Answer: D

If you want to pass the Apple 9L0-314 Exam sucessfully, recommend to read latest Apple 9L0-314 Dump full version.

clip_image001

Comments are closed.